The Layer

Protection coating: 200 ml (4 layers) polyurethane varnish sandpaper (grade 240), cotton lint-free cloths, brush painting domestic of 40 mm, two dishes for the mixtures, thin plastic bag, brush 70 mm, round marta brush, brush varnish layers 40 mm base once you have prepared, sanded surface and free from dust, use the domestica brush to apply a layer of silk painting and let dry 24 hours. Sanding lightly and remove the dust with a damp cloth. Apply a second layer of silk painting and dry two days. Despues, sand the surface and eliminate the layer of enamel powder place colors oil on a dish, add desiccants for varnish and linseed oil, and stir well. Finally add the white spirit (little by little) and mix well until you get a clear, although not too liquido (of creamy consistency) enamel. Apply an even coat to the surface with a brush paint domestica. Let dry 12 hours.

Make a ball with plastic bag and, holding it with your hand, press it against the wet glaze to create irregular drawings on the entire surface. Lightly mix drawing through a brush. With a clean cloth wrapped on his index finger, remove enamel semi humid areas so that they are visible parts of the layer base. Let dry 12 hours. Addition of streaks. Mix the oils in another dish and stir well. To get a natural aspecto, do not use pure white.

Hold the brush of marta and set at an angle of 90 with respect to the surface. From this position, draw veins always working toward one and from time to time, twisting the brush to create the casual shapes caracteristicas waters of the marble. Let dry for two to three days. Layers of protection. Apply at least four coats of varnish; Let dry 12 hours between layers; Lijar and gently clean each time. With this sophisticated work of painter, an effect that mimics the veining of marble in a wood surface can be achieved with paint. Original author and source of the article.


Comments are closed.