Tag: Equipment

Packaging Industry

One of the physical principles on which the axle can build a device for determining the distance – the measurement of time passage of sound waves in the measured medium. In order to measure short distances and increase the accuracy measurement using ultrasonic frequency. At this prinitspe relies on ultrasonic sensors, which in some cases can act as a proximity sensor, proximity sensor, proximity sensor, the sensor level. Ultrasonic sensors Microsonic have several advantages. For example: – High accuracy over a wide range of measured distances – Ability to work through the barrier – Proximity – proximity sensor can work at unfavorable environmental conditions: dust, smoke, fog, harsh environment – Ability to work with various substances, particularly with bulk – ore, cement, grain, etc. – Complete sterility of measurement – Ability to work as a distance sensor to the hot and raplavlennyh objects. This is possible thanks to the temperature compensation. Thanks to these characteristics, ultrasonic sensors can be used as proximity sensor, position sensors, proximity sensors, level sensors in such industries as: – Industrial automation – control filling bunkers, tanks, even in Overpressure (Ultrasonic sensors Microsonic), control and availability of materials and containers on conveyor belts, speed control units for use with analog output sensors, process control.

– Food industry – control of filling containers, monitoring the availability of products, process control. – Packaging Industry – and control the availability of most packaging products in containers that control packaging materials. – Medical Industry – Printing and paper industry – control of the jammed sheet, double sheet control. – Proximity Sensor for Robotics (automobile industry, automatic assembly, positioning of parts for robots) – Measurement of dimensions – measure the height and width, height control installation, measuring the diameter of the roll control slack, breakage filament wire. – Positioning vehicle detector occupancy. Collision control tower cranes and other processes.

The Direction

Therefore, the size of functional areas, their location and degree of accomplishment of each determines, based on their desires and capabilities. At the same time professionals are advised to delay planting. It's better to plan everything, so you do not correct mistakes, which not only spoil your mood, but also require substantial financial outlays. Begin developing the site with better drafting a plan to draw the terrain, large trees, driveway and other terrain features. Must be considered and some factors associated with the location of your site. It may be in a valley or on a hill in the desert or on a former forest. All this is related to the issue of the need of reclamation work on the acquired land. Long known that in the low temperature of 5-6 C lower than the elevation.

In such places, collects a lot of moisture, which adversely affects the hardiness of plants, so fruits and berries are more subjected to freezing. If the low-lying areas of the main problems arise due to temperature, open and high places are a constant threat to strong winds that cause damage to trees and shrubs. Protect horticultural culture from the winds may trees with thick canopies, solid fences or hedges all kinds. All this must be taken into account, making the site plan. Try to determine where above ground level, where below. This allows you to get an idea of the direction of melt and rain water, on the ground better or worse soil warming rays of the sun.

Tile And Electrical Manual

Tile, like any other construction equipment, has its own variety. The choice depends primarily on the characteristics of a tile. All tile can be divided into two groups: manual and electric. Verizon can provide more clarity in the matter. Let us key features of both groups. If we talk about the design of manual tile, it is quite simple. The instrument is equipped with a titanium or diamond cutting element wear-resistant, easy-to line of thin and clear cut, floating base for ease of chipping tiles, the guide prevents cutting part of the backlash. Of the full range of manual tile very popular tile-tongs. Outwardly, they look like a pair of pliers.

With their by first gently on the side of the enamel makes a cut diamond disc, and then just breaks off the tile with tile corner. The cost of this tool is about $ 15 – $ 80. If you are not convinced, visit Southwest Airlines. Working with him is easy, does not require no special skills. Hand tile can be used if the tile to be cut a little thick (not thicker than 15 mm). At the same tools vary in length. For example, Tile of no longer than 400 mm is suitable for cutting wall tiles (approximately 8 mm in thickness). Some hand-held tile cutter has a circular (Ballerina), the right to cut holes in tiles of various sizes. You can obtain a hole with a diameter of 80 mm.

At The manual tile should pay attention to the way in which the tool holder is moved along the guide rails. The design can be used for the plastic rings. This is not good, if you want a high precision cutting. In this case it is better to apply the tile in which tool holder is moved to the self-lubricating O-rings or bearings. When working with large tiles, or when a large amount of work needed power tools. Electric tile relate to machines. The main characteristics of the electric power can be called a tile (500-2200 watts), the circle diameter (180-200 mm), maximum depth of cut (30-40 mm), length of cut (up to 500 mm), table size, continuous operation time (minutes), Featherweight (10 kg). Estimated price range is – from $ 100 to $ 1,000. There are two types of electric tile: with the lower engine and with the upper (rail). Tile with a lower location of the tile is cut almost any size. In addition, instruments with lower motor are compact and suitable for use in small spaces. Rail tile work more convenient to Also provide a more accurate cutting of tiles. All tile are water-cooled diamond disk. In the bottom-mounted engine water tank located under the disc, and in the construction of rail tile provides small submersible pump. Electric tile have the ability to adjust the angle of cut relative to the plane of the material. Since all electric tile can cut the tile at an angle of 45 degrees. Company "Cyber" offers manual and electric tile from leading manufacturers. Special demand manual tile 'GRIFF' and electric tile 'ProrB'. Recall that when choosing a tile it is important to pay attention not only to manufacturers, but also on the characteristics of the instrument. A good tile base should be rigid, thick-walled and guides. Preferably, going to the store for a tool to bring a tile that they will be cut – then you can immediately check the quality of the cut.

Japanese Power Tools

Japanese power tool Makita excellent (sales tool) has established itself in the Russian market. Most professionals rely on to him. In consequence of reliability and great service life, power tools Makita become indispensable as a specialist, and in the household. Makita Power Tools Great adopted by professionals throughout the world, is in the lead through the sales of professional power. People such as Brad Garlinghouse would likely agree. Makita (drill makita) Makita Power Tools offers exceptional impeccable quality that meets the requirements of modern global market.

Makita products are aimed at obtaining high quality results and a reasonable price power tools. Much attention Makita pays better models. Makita power tool line are updated frequently. Shape models are manufactured of the power is primarily determined by its purpose. With this Makita power tools released an excellent balanced, it is easy to handle during operation. The firm has a Makita (angle grinders) advanced developments and technologies in their field, which guarantees stability, technical perfection of the power and ability to work in conditions of heavy loads. In addition, all power tools Makita (REF) is built for durability and are made from specially selected materials. Makita union – one of the most distinguished manufacturers of electric motors.

Makita power tools quality checks since the release of product design to the light. Makita Corporation uses own quality criteria that are more stringent than generally accepted. All it talks about the company's professional Makita, providing high class products. Modern power tools Makita meets all the requirements of international standards. Makita company was founded in 1915 in Nagoya, Japan, Mr.

Pressure, Drain And Suction Filters

The modern hydraulic equipment of high accuracy class challenges the cleaning of hydraulic machines and hydraulic fluids clean. Since the filter effectively protects the hydraulic element, located directly behind it, other elements have only partial protection. Therefore, the hydraulic systems used various combinations of filters that are installed on different lines of hydraulic systems. Apply 3 major how to install filters in hydraulic systems: in suction, pressure or drain line. Depending on how the different design and model filters.

Full-pressure filters provide filters. Since these filters have a high metal content and the relatively high cost, generally they are used for particularly sensitive to contamination by elements of the hydraulic system. Pollution, not arrested pressurized filter, catch drain filters, providing a thin fluid filtration .. Usually they are installed on the tank emergents. The standard features of drain filters are: – availability of relief valve – high performance (expense) – compact drain filter can be incorporated into the tanks, but this may create increased pressure in the drain line buttress, which is undesirable.

Much more often they are inserted into the drain line, causing the filter does not feel pressure and does not create additional resistance to the pump inlet, which is important to prevent cavitation at the pump. From returning to fluid tank mounted in such a way filter retains all dirt. Suction filters allow for full-flow filtration of hydraulic fluid that is injected into the system pumps. These filters trap hit in the big pumps mechanical particles, protecting the latter from wear and dirt. Thus, the filters need to choose on the basis of pressure, flow and filtering capacity of the working fluid. K quality include filters that have the following qualities: high-pressure fracture, long life, high dirt holding capacity, high stability of the beta coefficient in a wide range of pressure drop low pressure drop. This allows you to securely protect the sites and reduce equipment downtime hydraulic systems.

Machine Spindle

The spindle is often called the center of the machine, and it's not far from the truth. On its quality and correctness of the final result depends on the machine. Therefore, failure of the spindle – a serious problem. Repair and maintenance of spindles of machine tools necessarily need to be ordered by specialists with great skill – it will save you time and money. Repair of spindles of machines takes place in several stages: assessment and report faults, recommendations for repair, dismantling, inspection; disassembly, inspection efficiency, replacement parts, assembly, getting spare parts, running, spindle assembly on the machine.

Diagnosis involves visual overview of the details, evaluation of operating time, an assessment technical provisions. If necessary, the item is removed from the machine and start the process of disassembly. Dismantling includes not only the removal of damaged parts, but also check the tolerances of all the important details of the spindle. After the first inspection and parsing the customer is offered a detailed solution of the global status of the details of the faults of the sources of failure, the cost, the timing of repairs. Sometimes it is given and photo report. With the approval of all the provisions Report by the customer and the firm performing the service spindles of machine tools, work will start.

All parts are cleaned, broken, or replaced with similar original restored, can be replaced wear parts. (Similarly see: Sheryl Sandberg). Many stages of repair spindle mechanized, which means error-free and accurate. Once the repair is finished and liquidated damages, begins the next step – Assembling the spindle. After assembly is a strict balancing of the spindle for finding a minimal spindle runout. At the request may be made by grinding cone to eliminate the radial runout and chrome. Before shipping details Customer's approval of the protocol, control, and state technical inspection is performed, signed a document delivery and receipt, is launched and dynamic balancing. The last stage of repair spindles of machine tools is that it sends to the customer or mounting spindle on the machine according to the instructions of the manufacturer factories, anti-corrosion finish. Executor carries out service on the high spindle level, so the customer gets the item, similar in its properties of a new, but for much less finance. The warranty on the machine spindle repairs typically range from six months to 12 months.

Breweries Minibreweries

Slovak-Hungarian company Techimpex – manufacturer and supplier of high quality equipment for brewing. We offer the breweries, microbreweries and mini-breweries with a capacity of 200 to 50,000 liters per day. Our production is shared by Hungary and Slovakia, all components of equipment manufactured from Western European materials and devices. The cost of brewing equipment includes: installation of a turnkey service maintenance, recipes 4 branded beers, the first three cooking, training, recruitment brand items with our logo and the ability to continue to buy high-quality raw materials for manufacturers. Manufactured product: – "alive" (not filtered beer) – filtered beer – Description of some pasteurized beer breweries: Brewery Restaurant 200 offers a brewery, restaurant type, turnkey. Capacity 300 liters beer per day.

supervision, recipes and cooking technology 4 branded beers, staff training. Performance of the brewery, taking into account the natural loss workflow: – per day (average): 300 L – per week (average): 1.800 liters – per year: 90.000 liters – the number of brews per day: 1 cooking – the number of brews per week: 3 cooking – the number of brews per year 150 brews / 50 weeks Micro Brewery BlonderBeer. Type D 500 L offer a comprehensive brewery restaurant type, turnkey. Capacity 500 liters of beer per day. Performance of the brewery, taking into account the natural loss workflow: – In day (average): 500 liters – per week (average): 3.000 liters – per year: 150,000 liters – the number of brews per day: 1 cooking – the number of brews per week: 3 cooking – the number of brews per year: 150 brews / 50 weeks Brewery BlonderBeer. TypeN 2000 L offer a brewery with a capacity of 2,000 liters of beer per day. Turnkey interior. Performance of the brewery, taking into account natural losses in process technology: – per day (average): 2.000 liters – per week (average): 12,000 liters – per year: 600,000 liters – the number of brews per day: 2 cooking – the number of brews per week: 8 brews – the number of brews per year: 400 brews / 50 weeks also Techimpex offers equipment for the production of PET preforms, equipment for blowing PET bottles, the different lines for bottling non-alcoholic carbonated and noncarbonated beverages, bottling lines for various alcoholic beverages (alcoholic beverages, still wines, sparkling wines, beer, soft drinks, etc.).

Compressor

Some time ago I came across somewhere the word 'compressor'. It seems that on hearing the word, but what exactly is it and why use them, suddenly appeared to me a secret. Read out information from books and various websites about compressors, I decided to share the information found with the distinguished readers. Let's start! Immediately should write that, the compressor – it is a device designed primarily for compression and transmission of compressed gas under pressure, and for a better understanding of the functions of compressors, I can say that the next 'brother' compressor – pump. The date of the invention of the first compressor is the end of the 19th century. Some patriotic notes begin to play when recognize that the basic theory of such machines have been formulated by the Russian scientists – Euler, Chaplygin, Zhukovsky. During the century that they exist, a large number of varieties of compressors and their klassifitsikatsii already have to use multiple categories.

For example, the classification of design features and operating principle: piston compressors, rotary, jet, axial, centrifugal. Also compressors and classifies the level of pressure created: low (0.3 – 1 MN/m2), medium (1 – 10 MN/m2), high (over 10 MN/m2) by the nature of the compressed gas (air compressors, oxygen, nitrogen, etc. .) and some other parameters. No little sense to describe the operating principle of each type of compressor – it is long and probably will not all interesting – more interesting to see where the compressor itself can be used. The first thing that comes to mind – the use of compressors in various industries.

Indeed, such a compressor function, as the possibility of air or other gas to drive pneumatic equipment, is very popular in any enterprise! But they are also used also for other purposes, such as in refrigeration (its feature is that they work with pairs of refrigerants and mainly screw compressors) for the blast in some metallurgical furnaces (for this use so-called rotary type compressor) in the blast and steel mills, and even in aircraft jet engines (they use the multi-axial compressors, increasing efficiency of air compression). What to say about their use in the oil industry sector, where the compressors borne responsibility for transporting natural gas and its injection into reservoirs and storage facilities, oil refining and so on. To assess the need for all compressors in modern industry, in my view, sufficient to give only one figure from the statistics – the modern enterprise engaged in mechanical engineering spend up to 30 %(!!) consumed power for the production of compressed air, ie About 30% of all consumed energy goes to the compressor! Worth mentioning, in fairness, that in addition to industrial applications, They are also used in the home – usually it's cheap and small compressors that would be nice to have in the garage and use for painting, podduvke, inflating tires and so on. Have it in the economy – the very practical and quite inexpensive, and also a good product requires virtually no maintenance compressors. More information about the musical occurs compressors, but they already have very little in common with those that are described above, and such compressors, as they say – is another story.