Automobile Maintenance

Minimum cost of insertions and filter maintenance. scope filter Automobiles – trucks and cars, buses, municipal vehicles, cranes and other equipment on the chassis. Road-building machines, agricultural machines, forklifts, compressors, etc. Engines sea and river vessels. Stationary engine-generator and pumping units. mining machines, gas stations and oil depots It is also possible to supply special filters to order.

Insertion filter separator 2000 is installed in the suction highway fuel system, ie between tank and booster pump. In a convenient location for mounting the suction line is cut and installed the filter. Filed under: cloud computing. Available in this line filters should be established removed. (Full-time filters in the discharge line remain.) Pay attention to the possibility of connecting the inlet and outlet pipes on either side of the filter. The filter can be built above or below the fuel tank. The most desirable option – a level inlets filter coincides with the level of the upper edge tank. When placing the filter is above or below the tank needed Insertion shut-off valve / with a through cross-section of section of the pipeline, because otherwise, when removing the filter cover can leak fuel.

After the insertions separator 2000 is filled with fuel, thereby removes the air from the supply system, which eliminates the long-idle operation booster pump. Avoid the 90 angles at the installation in conduit, or use the 90 fitting. Use the original installation fitting with mounting rings supplied by our company. Hollow bolt with copper gaskets is difficult to sealed, which can lead to loss of pressure.